View Full Version : Project: INCOGNITO teardown!
Trick
02-16-2009, 03:41 PM
Well finally getting some free time between school/work/ and finishing up my new garage to start working on the trucks.
For those of you that don't know here is a little backstory
http://www.svtperformance.com/forums/2nd-generation-22/518753-project-incognito-pics.html
There are quite a few pics so I'll just start with my online photo album then post up updated pics from there!
picking up a tranny jack tonight so should have old engine completely out this week and start tearing out the interior after that.
enjoy
Picasa Web Albums - Pat - Truck Project (http://picasaweb.google.com/92FiveOGt/TruckProject#)
636KAWI
02-16-2009, 06:11 PM
Decent!
Trick
02-16-2009, 07:54 PM
Goal: have truck running before Jester's bike is done
95gsx
02-16-2009, 08:01 PM
want to make it a easy win i could use some beer :)
Trick
02-16-2009, 08:08 PM
ha ha, hows that?
95gsx
02-16-2009, 09:25 PM
i have some of his parts.
Trick
02-16-2009, 10:36 PM
How much beer is needed to misplace said parts...?
95gsx
02-16-2009, 10:40 PM
oh a 12 would be enough for a month or so
Trick
02-16-2009, 11:08 PM
Can be arranged
95gsx
02-16-2009, 11:16 PM
sounds great jimbo even texted me this morning asking about them MUAHAHAHAHAHA
triumph955i
02-16-2009, 11:29 PM
black wheels look badass.
Trick
02-16-2009, 11:44 PM
I am sitting 5 ft from that homo (referring to Jester)
turbo_jb
02-17-2009, 12:50 AM
tzr were u on here all night? shame on u
Trick
02-17-2009, 01:11 AM
tzr were u on here all night? shame on u
yes, but i had the first nb post way earlier
Jester
02-17-2009, 01:24 AM
I know where pat lives so if said parts get misplaced, then said truck parts get stolen and tires get slashed.
Trick
02-17-2009, 01:29 AM
I know where pat lives so if said parts get misplaced, then said truck parts get stolen and tires get slashed.
doors locked...
Trick
02-17-2009, 01:30 AM
...and guard dog out
ps, all the truck parts that are out, I dont need, you can have them
95gsx
02-17-2009, 04:31 PM
sorry pat the parts will probably be delivered tonight to jim
Trick
02-17-2009, 05:08 PM
Meh, still means he has to get them on
95gsx
02-17-2009, 05:18 PM
true
Trick
02-17-2009, 08:44 PM
engine's coming out tonight...
95gsx
02-18-2009, 06:35 PM
Sic!
Trick
02-24-2009, 04:43 AM
FINALLY engine and trans came out tonight with thanks to mosher helping out. pics updated
Trick
02-24-2009, 04:51 AM
and here
http://photos-a.ll.facebook.com/photos-ll-snc1/v2329/159/54/17212816/n17212816_37044384_8513.jpg
636KAWI
02-24-2009, 12:49 PM
Was the truck drivable?
turbo_jb
02-24-2009, 12:58 PM
Was the truck drivable?
lol
Trick
02-24-2009, 02:40 PM
It used to be driveable, just slow...
636KAWI
02-24-2009, 03:18 PM
I meant after the wreck
Trick
02-24-2009, 03:40 PM
Red truck's tranny line was ripped off so it wouldn't drive very far
Trick
02-24-2009, 03:44 PM
I drove it on a trailer loading it and into the garage
Trick
03-28-2009, 06:34 PM
Online album updated!
Will an admin put this thread in work logs, thanks
95gsx
03-29-2009, 01:19 AM
no you should of been less noobish and done it before it started.
Trick
03-29-2009, 02:35 AM
You should suck less cock... Move it
95gsx
03-29-2009, 11:51 AM
to busy with the cock!
Trick
03-29-2009, 03:08 PM
Damn drunk foruming... I'm not even gonna change it...
Trick
03-31-2009, 01:34 AM
to busy with the cock!
Thank you :kiss:
Trick
03-31-2009, 01:35 AM
So got the front suspension completely off the truck frame tonight. Busy with a test till Wed then gonna strip gas tank and rear suspension, brake lines, and fuel lines off the frame and have it ready to be sand blasted!!! hopefully I will have frame out this weekend or early next week to get coated and back to me for reassembly!!
95gsx
03-31-2009, 12:59 PM
Thank you :kiss:
mmmm hot
Trick
04-06-2009, 03:43 AM
Frame is stripped down to nothing... found out my rear end is bent so HUGE dilemma there...
and still need one of the tmco boys to come see and tell me how much powda I will need, maybe i'll just ask tmco when i go in tomorrow...
95gsx
04-06-2009, 12:54 PM
enough to coat a frame?!?!?! better to ask someone who works there. mostly because you are going to get it done with paying for it.
Trick
04-09-2009, 07:46 PM
pics!
http://img9.imageshack.us/img9/2729/img0512m.jpg (http://img9.imageshack.us/my.php?image=img0512m.jpg)
http://img21.imageshack.us/img21/1277/img0513o.jpg (http://img21.imageshack.us/my.php?image=img0513o.jpg)
http://img8.imageshack.us/img8/5472/img0516d.jpg (http://img8.imageshack.us/my.php?image=img0516d.jpg)
http://img8.imageshack.us/img8/5373/img0518e.jpg (http://img8.imageshack.us/my.php?image=img0518e.jpg)
i'm not sure if resizing the pics set them sideways, but they are straight on my computer i'm using
95gsx
04-09-2009, 07:59 PM
where are you doing all of this?
Trick
04-09-2009, 08:02 PM
where are you doing all of this?
my garage
95gsx
04-09-2009, 08:29 PM
where is that at
Trick
04-09-2009, 08:30 PM
next to my house
95gsx
04-09-2009, 08:32 PM
i fails. just wondering how you are getting it all torn down taking the cab off and what not.
Trick
04-09-2009, 08:39 PM
lots of manpower for heavy lifting, weekends spent in the garage... etc
triumph955i
04-15-2009, 02:35 AM
lookin good. Did you pull the interior before lifting the cab or just get a few buddies over to help lift it off the frame?
Dont know if you already said this but whens the goal to have in completed?
Trick
04-15-2009, 02:49 AM
Interior was stripped completely and it was still a heavy bitch. Goal is end of may for americruise, powdercosting the frame and this broken garage door I have might hurt that. Might have to take a week off work once school is out and have a truck put 2gether party
ARE WON
04-15-2009, 09:49 AM
We need to get that done to beat up on a maro!
Jester
04-15-2009, 10:16 AM
hmm look at that piece of shit garage door in the background
Trick
04-18-2009, 05:43 PM
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs021.snc1/3062_630283330163_17212816_37377166_7966168_n.jpg
05barbiestunter636
04-18-2009, 07:00 PM
haha i just got this pic as a text message as an excuse of not riding on this perfect day out!
Trick
04-18-2009, 07:12 PM
Gotta do what I gotta do
Trick
04-20-2009, 06:41 AM
before:
http://img366.imageshack.us/img366/3508/frame013i.jpg (http://img366.imageshack.us/my.php?image=frame013i.jpg)
http://img366.imageshack.us/img366/1285/frame014.jpg (http://img366.imageshack.us/my.php?image=frame014.jpg)
http://img366.imageshack.us/img366/4754/frame015.jpg (http://img366.imageshack.us/my.php?image=frame015.jpg)
After:
http://img366.imageshack.us/img366/8963/frame025.jpg (http://img366.imageshack.us/my.php?image=frame025.jpg)
http://img366.imageshack.us/img366/9123/frame019.jpg (http://img366.imageshack.us/my.php?image=frame019.jpg)
http://img366.imageshack.us/img366/4018/frame020.jpg (http://img366.imageshack.us/my.php?image=frame020.jpg)
http://img366.imageshack.us/img366/5811/frame026.jpg (http://img366.imageshack.us/my.php?image=frame026.jpg)
http://img366.imageshack.us/img366/3982/frame027.jpg (http://img366.imageshack.us/my.php?image=frame027.jpg)
Trick
05-01-2009, 01:13 PM
hitch... so the stock frame coating that was left inside all the boxed areas of the frame melted out when they put it in the oven and i had to pick the frame up yesterday and re blast it this weekend...
setback #1
Trick
05-13-2009, 03:47 PM
frame's back!!!
http://img218.imageshack.us/img218/8490/91309007.jpg
http://img222.imageshack.us/img222/3872/91309002.jpg
http://img232.imageshack.us/img232/9158/91309003.jpg
http://img156.imageshack.us/img156/7610/91309004.jpg
http://img232.imageshack.us/img232/2411/91309005.jpg
http://img509.imageshack.us/img509/3691/91309006.jpg
jazzman
05-13-2009, 04:33 PM
looks nice... hard to beat black
Trick
06-02-2009, 05:47 AM
http://img155.imageshack.us/img155/4382/6209033.jpg
http://img197.imageshack.us/img197/5407/6209016.jpg
http://img192.imageshack.us/img192/4458/6209017.jpg
http://img189.imageshack.us/img189/9576/6209029.jpg
http://img266.imageshack.us/img266/4746/6209031.jpg
Trick
06-02-2009, 05:55 AM
a arms were a pita because I don't have any weight on the front end to counteract the springs when I try to put the ball joints in
http://img192.imageshack.us/img192/9287/pic019.jpg
http://img197.imageshack.us/img197/7097/pic018.jpg
Trick
06-02-2009, 05:56 AM
I have cleaned the springs since the pictar above was taken
Trick
06-06-2009, 05:26 AM
worked all night to get the engine out to no avail.... what a fucking pain in the ass!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
Trick
06-06-2009, 05:26 AM
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!1
Trick
06-06-2009, 05:27 AM
so just going to take the trans off the engine instead of trying to skip that step of the operation
Jester
06-06-2009, 12:12 PM
great
daytonadad
06-06-2009, 12:48 PM
you better bring it to me for an alignment
Trick
06-07-2009, 02:38 AM
way to look to the future...
Trick
06-07-2009, 02:43 AM
Got some work done tonight
Also got the cops called on me for "playing my music too loud..."
http://img132.imageshack.us/img132/2124/6709002.jpg
http://img15.imageshack.us/img15/60/6709003.jpg
http://img15.imageshack.us/img15/6369/6709004.jpg
http://img192.imageshack.us/img192/1238/6709005.jpg
http://img25.imageshack.us/img25/4045/6709007.jpg
http://img2.imageshack.us/img2/3924/6709009.jpg
Trick
06-08-2009, 12:09 AM
got the blower and upper plenum on today along with all new bearings in the front end and got it rolling
http://img196.imageshack.us/img196/6074/6709016.jpg
http://img188.imageshack.us/img188/6657/6709018.jpg
http://img257.imageshack.us/img257/5439/6709024.jpg
http://img504.imageshack.us/img504/263/6709026.jpg
Nickels
06-08-2009, 07:09 PM
Its gonna look pretty sicc. Cant wait to see it done!
Trick
06-09-2009, 03:32 AM
I can't wait to drive it again!
Nickels
06-09-2009, 05:49 PM
Yea, it felt good to drive the yota after 2 or 3 months of being down.. And my old integra after being down for 7 months. Its like a whole new car!
Trick
06-23-2009, 03:29 PM
So I bought this shirt...
http://img146.imageshack.us/img146/4353/62309011.jpg
and got all this other crap with it..
http://img33.imageshack.us/img33/6233/62309001.jpg
http://img44.imageshack.us/img44/4263/62309002.jpg
http://img44.imageshack.us/img44/1883/62309003.jpg
http://img40.imageshack.us/img40/7250/62309004.jpg
http://img26.imageshack.us/img26/1962/62309006.jpg
http://img230.imageshack.us/img230/6961/62309007.jpg
http://img29.imageshack.us/img29/7994/62309010.jpg
http://img268.imageshack.us/img268/4270/62309009.jpg
http://img34.imageshack.us/img34/3592/62309008.jpg
ARE WON
06-23-2009, 03:59 PM
damn....thats a lot of free shit!!
Trick
06-23-2009, 04:03 PM
I know!! its my lucky day!!!
Trick
06-23-2009, 11:01 PM
So got some work done on the truck tonight... couldn't finish the exhaust since I don't have all the hangers off the old truck yet and I have an exam tomorrow in my summer class!!
http://img190.imageshack.us/img190/6586/62309012.jpg
http://img196.imageshack.us/img196/9162/62309013.jpg
http://img199.imageshack.us/img199/3659/62309015.jpg
http://img14.imageshack.us/img14/9634/62309016.jpg
http://img10.imageshack.us/img10/9673/62309017.jpg
http://img193.imageshack.us/img193/9858/62309018.jpg
http://img196.imageshack.us/img196/286/62309019.jpg
http://img40.imageshack.us/img40/8231/62309020.jpg
http://img193.imageshack.us/img193/7417/62309021.jpg
ARE WON
06-23-2009, 11:48 PM
damn!! just looked at that hand polished driveshaft. oh and the exhaust looks good
Trick
07-03-2009, 08:01 PM
A good example of what NOT to do with a bobcat, ratchet strap, and some alcohol all mixed together...
I think this look works
http://img35.imageshack.us/img35/6071/7309015.jpg
are we sure this is going to work?
http://img44.imageshack.us/img44/4649/7309001.jpg
http://img21.imageshack.us/img21/1333/7309002.jpg
guess it worked
http://img178.imageshack.us/img178/6384/7309003.jpg
http://img41.imageshack.us/img41/3797/7309005.jpg
http://img403.imageshack.us/img403/5391/7309006.jpg
http://img43.imageshack.us/img43/1233/7309009.jpg
http://img156.imageshack.us/img156/9295/7309010.jpg
http://img505.imageshack.us/img505/816/7309011.jpg
http://img268.imageshack.us/img268/6969/7309012.jpg
http://img403.imageshack.us/img403/1816/7309013.jpg
Nickels
07-08-2009, 12:36 PM
Hahaha bobcat wheelies ftw
Tommycatz
07-09-2009, 12:22 AM
who's streetfighter?
Trick
07-09-2009, 12:45 AM
Jeff Spickelmeier
he lives with me
Jester
07-09-2009, 11:25 AM
He lives with Pat
Pat puts up with him.
03yamahar1
07-15-2009, 05:22 PM
so i didnt read really any of this thread just looked at pictures ha.. but when are you expecting to have this done? so we race our bike against each other now our cars/trucks? haha looks good so far
Trick
07-23-2009, 11:16 AM
work has been little and tedious getting the cab ready to be put back on the frame. Also found out my new body mounts are back ordered till mid august so using the factory ones for now. Hopefully in another week the cab will be on the frame and I can start wiring, YAY!
old frame on its way to the scrap yard
http://img265.imageshack.us/img265/5004/72009029.jpg
gas tank, brake lines, fuel lines, and wiring ran
http://img149.imageshack.us/img149/8620/72009024k.jpg
http://img403.imageshack.us/img403/4002/72009025.jpg
http://img33.imageshack.us/img33/2230/72009027.jpg
Ah! more free space!!
http://img9.imageshack.us/img9/7475/72009028.jpg
Trick
07-23-2009, 11:25 AM
so i didnt read really any of this thread just looked at pictures ha.. but when are you expecting to have this done? so we race our bike against each other now our cars/trucks? haha looks good so far
who knows when it'll be done....
by next spring, anytime before that is a special bonus to me
Nickels
07-23-2009, 06:16 PM
I want your garage
Trick
07-23-2009, 06:33 PM
I want your cock
I don't blame you
Nickels
07-23-2009, 08:35 PM
Ive already had it. ZING
95gsx
07-28-2009, 09:00 PM
looks like your tire got smaller, doesn't quite hug that fender ;)
Trick
08-02-2009, 01:18 PM
getting ready
http://img205.imageshack.us/img205/3899/8209001.jpg
http://img40.imageshack.us/img40/2706/8209004.jpg
Time for wiring to begin!
http://img81.imageshack.us/img81/4357/8209007.jpg
http://img41.imageshack.us/img41/2849/8209008.jpg
http://img80.imageshack.us/img80/3610/8209009.jpg
Starting to look like a truck
http://img38.imageshack.us/img38/5397/8209012.jpg
http://img146.imageshack.us/img146/6159/8209013.jpg
Finally getting some free space in my messy garage
http://img194.imageshack.us/img194/2223/8209014.jpg
Thanks everyone who helped lift it on!!!
turbo_jb
08-02-2009, 07:55 PM
opps
Tommycatz
08-03-2009, 03:49 PM
seems to be coming along!
Nickels
08-11-2009, 05:18 PM
I HELPED!!! kinda.. lol
ARE WON
08-13-2009, 09:23 PM
I gave hed
Nickels
08-17-2009, 05:20 PM
That was afterwards..
Trick
08-24-2009, 01:09 PM
NEEDED: Motivation to get this shiz done!
turbo_jb
08-24-2009, 01:19 PM
i bet u ten dollars my truck will beat your truck in a race. theres ur motivation. offers stands untill a week before the first snow.
ARE WON
08-24-2009, 04:12 PM
for everyone's information...a LS1 will beat any production Ford motor.
Trick
08-25-2009, 04:55 AM
i bet u ten dollars my truck will beat your truck in a race. theres ur motivation. offers stands untill a week before the first snow.
you have a truck?
Trick
08-25-2009, 04:56 AM
for everyone's information...a ls1 will beat any production ford motor.
direct injection!!!!!
turbo_jb
08-25-2009, 12:43 PM
just trying to motivate u.
95gsx
08-25-2009, 12:53 PM
bet mine will go farther on mud.
Trick
08-25-2009, 03:55 PM
bet mine will go farther on mud.
you have a truck?
95gsx
08-25-2009, 04:26 PM
no, explorer.
Nickels
08-27-2009, 10:05 PM
^ i lold when you said No.
ARE WON
08-28-2009, 09:59 AM
^i lold when you said "lold"
Trick
09-06-2009, 03:53 PM
Getting it ready to go back together
http://img80.imageshack.us/img80/2595/truck9609007.jpg
L wiring harness getting ready to install in black truck
http://img186.imageshack.us/img186/1300/truck9609001.jpg
wiring the engine bay
http://img178.imageshack.us/img178/9492/truck9609002.jpg
L cab almost ready to be scrapped
http://img524.imageshack.us/img524/7439/truck9609003.jpg
Swapping the L computer over
http://img524.imageshack.us/img524/8327/truck9609004.jpg
Old wiring harness going in the trash
http://img527.imageshack.us/img527/3917/truck9609005.jpg
http://img38.imageshack.us/img38/2976/truck9609006.jpg
Trick
09-12-2009, 11:56 AM
This project is starting to suck. TOO much fabrication and not enough fabrication tools available in my garage....
one wiring harness completely ran
http://img177.imageshack.us/img177/4264/truck91109002.jpg
I decided there was no way I was going to try and swap the PATS electronics out, so I just swapped the whole stearing column
http://img16.imageshack.us/img16/9653/truck91109001.jpg
http://img197.imageshack.us/img197/893/truck91109003.jpg
Got the vents in, along with the main wiring harness. Too bad I can't remember for the life of my where half of the wires go to.
http://img22.imageshack.us/img22/7320/truck91109004.jpg
http://img245.imageshack.us/img245/897/truck91109006.jpg
Got some other work done in the engine bay, but it just disappointed me more. I am discovering a couple bolts that snapped while I was tearing it down and my drill was dead so didn't even mess with trying to get them out. Also swapped brake pedals, tried to swap gas pedals...but they mount different :sillyme: looking forward to other stuff while I was bored and noticed that I have a lot of missing mounting holes from truck to truck.
Hopefully tonight I will get the engine bay completely wired and start putting accessories back in it.
Jester
09-14-2009, 12:06 AM
RHD swap!
ARE WON
09-14-2009, 12:12 AM
I see with my little eye:
A car with at least 500 sticker horsepower!
Trick
09-17-2009, 12:23 PM
PHUCK!!!
all the interior work I got done last weekend has to come back out..................
Nickels
09-19-2009, 01:16 PM
WHAT?! For why?!
Trick
09-19-2009, 02:08 PM
The heater cores are diffrent
Trick
09-22-2009, 11:09 PM
http://www.sendspace.com/file/zxpr3k
Trick
09-22-2009, 11:09 PM
^everyone disregard that, its a service manual for my truck.... just needed a place to save it
Trick
10-08-2009, 04:27 AM
Should fire this weekend
Nickels
10-10-2009, 07:18 PM
:ohnoes:
Trick
10-15-2009, 05:17 PM
my motivation...
http://videos.streetfire.net/video/HD-F150-and-SVT-Lightning_712922.htm
jazzman
10-16-2009, 11:58 AM
neat
Trick
10-17-2009, 01:17 AM
http://www.youtube.com/watch?v=lXVaFeJ1mhA
ARE WON
10-17-2009, 03:33 AM
Sick
Trick
10-17-2009, 05:17 AM
J. Rosenau is a fag?
turbo_jb
10-22-2009, 08:20 PM
^^^
yea... i think i read that some where
ARE WON
10-22-2009, 11:50 PM
J. Rosenau is lame too!
Nickels
10-25-2009, 07:17 PM
Ive fucked him..
Nickels
10-25-2009, 07:17 PM
It was good
Trick
10-26-2009, 01:40 PM
:orly:
jazzman
10-26-2009, 02:16 PM
aw dam i thought there was an update
Trick
10-26-2009, 02:46 PM
I need a F250 tranny cooler
Nickels
10-27-2009, 08:56 PM
Then get one, money bags.
Trick
10-27-2009, 09:03 PM
That's the problem... No money
Trick
11-26-2009, 07:31 AM
The learning curve to figure out the lines took me a lil while.. could have had to do with me starting after getting home from the bars....?
http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs042.snc3/12947_678156192563_17212816_39199329_7235827_n.jpg
Trick
11-26-2009, 10:37 AM
done
http://img177.imageshack.us/img177/9516/112609002.jpg
http://img209.imageshack.us/img209/308/112609003.jpg
Trick
11-26-2009, 10:45 AM
http://www.youtube.com/watch?v=PZwQ8wjlTA0
Tommycatz
11-26-2009, 10:47 AM
nice!
Trick
11-26-2009, 10:51 AM
http://www.youtube.com/watch?v=EE7FrvpMXKA
ARE WON
11-26-2009, 02:05 PM
<--------Likes this!
Trick
11-26-2009, 09:50 PM
^
|
|
|
does
not
get
to
drive
this
Tommycatz
11-27-2009, 10:31 AM
hahahahaha
Trick
11-29-2009, 02:18 PM
Intercooler pump is out, gotta order a new one.....
Jester
11-29-2009, 04:40 PM
^
|
|
|
does
not
get
to
drive
this
BA!
jazzman
12-04-2009, 02:46 PM
question: who did your sandblasting?
Trick
12-04-2009, 02:53 PM
Answer: myself
jazzman
12-04-2009, 04:00 PM
question the deuce: how much does a sandblaster/sand cost, and is it dummy proof?
Trick
12-04-2009, 04:05 PM
I borrowed the sandblaster from spickelmier, and I bought sand from Home Depot. I ended up using a lot!
I paid to have my rims blasted at Kaiser Blasting, can't remember the price though
Trick
12-08-2009, 09:26 AM
The last piece of the puzzle to be able to drive the truck finally shipped today after being backordered since August :woot:
can't drive it even if i wanted to now... :(
KyleJ
12-08-2009, 09:46 AM
Fuck that, Taylor was driving his Dakota the other night.
Trick
12-08-2009, 09:55 AM
he doesn't have a fresh, clean powdercoated frame either...
along with other variables
Trick
12-08-2009, 09:56 AM
450hp...
500+ ft lbs....
jazzman
12-08-2009, 10:57 AM
thats some cajones
Jester
12-08-2009, 12:33 PM
mmmmmmmmmmmmmmmmmmhhhhhmmmmm. <-----(Sound of a black girl doing that.)
06_636
12-08-2009, 02:06 PM
Pat's truck >>>>>>>>> Taylors truck
Jester
12-14-2009, 06:28 PM
pats jeep >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> pats truck
Jester
12-14-2009, 06:28 PM
amount of pussy that the truck will get >>>>>>>>>>>>>>>>>>>>>>>>>>> amount of pussy the jeep got
Trick
12-15-2009, 03:45 PM
lets keep this on topic
Jester
12-15-2009, 06:03 PM
This are work log. This are need serous time.
Trick
12-15-2009, 06:06 PM
yous get no ride since I cants delete posts
03yamahar1
12-19-2009, 07:44 PM
so how close is thing thing to being done and driving around?
Trick
12-19-2009, 07:47 PM
When there is no snow,ice, salt, or any combination of the 3 still on the road
03yamahar1
12-19-2009, 07:48 PM
so its running and all back together and good to go?
Trick
12-19-2009, 07:49 PM
its running
Jester
12-20-2009, 12:52 PM
sounds good though. It quiet.
Trick
12-20-2009, 03:23 PM
slow
ARE WON
12-20-2009, 07:17 PM
Shitty
Jester
12-22-2009, 07:50 PM
wins the race
turbo_jb
12-22-2009, 08:14 PM
when racing nothing.
ARE WON
12-22-2009, 08:34 PM
haha
Jester
12-22-2009, 08:41 PM
its whiney too
Trick
12-23-2009, 03:18 AM
when racing nothing.
wanna do a dig race against your kawi when its done??
turbo_jb
12-23-2009, 01:21 PM
no.
Jester
12-23-2009, 05:28 PM
look at my horse
Trick
01-01-2010, 06:56 PM
http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs147.snc3/17447_685814205843_17212816_39432624_5985544_n.jpg
Trick
01-01-2010, 06:57 PM
http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs147.snc3/17447_685813891473_17212816_39432619_2870149_n.jpg
ARE WON
01-01-2010, 07:07 PM
getting there
wanna do a dig race against your kawi when its done??
u can race my kawi :D i havent raced it yet haha
ps im gunna read the whole svtp thread, and maybe this one...seems like a sweet ass build
Nickels
01-04-2010, 04:35 PM
Can i drive over it with my toyota?
Trick
01-04-2010, 06:14 PM
Quit whoring my wl
Nickels
01-04-2010, 06:30 PM
I was adding something to the 9 page worklog. I ACTUALLY want to drive over your truck. Or at least park with one wheel on your hood.
Trick
01-04-2010, 08:07 PM
Wait.... your truck can drive?
ARE WON
01-04-2010, 08:56 PM
:popcorn:
Nickels
01-04-2010, 10:16 PM
No :(
It runs though!
ARE WON
01-05-2010, 11:13 AM
So does pat's
Trick
01-16-2010, 02:42 AM
http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs147.snc3/17447_689435753233_17212816_39569065_3868145_n.jpg
Trick
03-06-2010, 04:11 AM
http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs437.snc3/25139_700308903353_17212816_39846362_6952631_n.jpg
Trick
03-11-2010, 04:59 AM
where was this a year ago...
http://cgi.ebay.com/ebaymotors/Ford-F-150-SVT-1999-Ford-F150-SVT-Lightning-Nice-Truck-Needs-a-Motor_W0QQcmdZViewItemQQhashZitem53e006744cQQitemZ 360240804940QQptZUSQ5fCarsQ5fTrucks
ARE WON
03-12-2010, 12:11 AM
damn...
636KAWI
03-12-2010, 12:45 AM
Hurry Up!
Trick
03-12-2010, 01:17 AM
cant, school dominates my life
Trick
03-12-2010, 01:17 AM
havent been to bed before 4am this whole week
636KAWI
03-12-2010, 01:48 AM
Fuk scool
Trick
03-31-2010, 03:53 AM
bump,
hope to drive this around the block this weekend.
Trick
04-13-2010, 04:43 AM
no driving. tie rod didn't fit.
The checklist
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs477.ash1/26121_708468172113_17212816_40096217_6275313_n.jpg
Trick
05-04-2010, 12:27 AM
http://img696.imageshack.us/img696/768/truck004m.jpg
http://img146.imageshack.us/img146/5572/truck003g.jpg
http://img23.imageshack.us/img23/7581/truck002g.jpg
http://img197.imageshack.us/img197/7487/truck001v.jpg
http://img441.imageshack.us/img441/6048/truck005.jpg
Trick
05-05-2010, 10:22 AM
Daytonadad's
daytonadad
05-05-2010, 02:09 PM
i cant believe i have a freakin ford in my garage
i cant believe i have a freakin ford in my garage
do a huuuuuuuge burnout. i wont tell.
Trick
05-05-2010, 02:38 PM
fk, I left the keys there...
ARE WON
05-05-2010, 02:40 PM
i cant believe i have a freakin ford in my garage
you just cant believe how good your garage looks now
Trick
05-05-2010, 02:52 PM
the truck can't compare to the GTP's level of fast that sits next to it.
ARE WON
05-05-2010, 04:41 PM
the truck can't compare to the GTP's level of fast that sits next to it.
verzGTP?
Trick
05-05-2010, 04:44 PM
JennyGTP
daytonadad
05-06-2010, 07:39 AM
not enough superchargers in my garage
Trick
05-06-2010, 09:43 AM
eeeeeeeeeeeEEEEEEEEEEEEEE
ARE WON
05-06-2010, 12:46 PM
not enough superchargers in my garage
im jealous
are you done with this thing yet?
Trick
05-28-2010, 03:34 AM
ha
Trick
07-01-2010, 01:24 AM
dash is in.
Bigstunter10r
07-06-2010, 01:50 AM
Did you find out what those two plugs go to yet?
Trick
07-06-2010, 02:57 AM
^not very specific.
and probably not
Trick
07-09-2010, 05:18 AM
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs138.snc4/37261_729962661983_17212816_40840301_7549722_n.jpg
Bigstunter10r
07-09-2010, 11:57 AM
You re-installing airbags or does that classify as weight reduction along with the glovebox?
Trick
07-10-2010, 10:43 PM
http://www.youtube.com/watch?v=NA8Hx4Ukjyo&feature=youtube_gdata
ARE WON
07-10-2010, 11:49 PM
loud?
Trick
07-11-2010, 01:37 AM
No.
ARE WON
07-12-2010, 01:38 AM
got r did
Trick
07-19-2010, 01:53 AM
Drove it home tonight. Yogi witnessed. Anthony witnessed
Burntz
07-19-2010, 02:44 PM
woot!
ARE WON
07-20-2010, 01:42 AM
yup
Trick
07-20-2010, 10:02 AM
deal pending on these...
http://img706.imageshack.us/img706/3228/slicks.jpg
just waiting to get paaaaaaid
Jester
07-20-2010, 11:32 AM
broken image
Trick
07-20-2010, 12:01 PM
I see that... he used the forum to attach it so you have to be a member...
Its a set of 28" hoosier slicks mounted on remz.
Trick
07-20-2010, 03:46 PM
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs072.snc4/34955_733361999683_17212816_40960459_4967875_n.jpg
Jester
07-20-2010, 05:16 PM
cant wait till the skirts and bumper go on
Bigstunter10r
07-20-2010, 05:28 PM
You better get them slicks buddy! Truck looks sexy, like a ginger!
ARE WON
07-20-2010, 06:32 PM
cant wait till the skirts and bumper go on
mmmhmmmm
Trick
07-21-2010, 11:36 AM
so.....
slicks took backseat to this
http://img826.imageshack.us/img826/2254/truxedo.jpg
price was too good to pass up.
trying to rebuild my ic pump at work today
Trick
07-26-2010, 02:24 AM
-Drove over 500 miles over the past week. Its running GREAT! Still need a new intercooler pump, mine isn't pushing much fluid around.
I haven't got the front bumper on until I get the pump issue resolved. Hoping to get a pump out this week and get it tuned.
Trick
07-26-2010, 06:43 AM
here is how the interior sits
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs120.ash2/39342_734739738683_17212816_41009983_2479308_n.jpg
Bigstunter10r
07-26-2010, 08:57 AM
^Glovebox!^
Trick
07-27-2010, 04:35 AM
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs174.snc4/38021_735073834153_17218442_41026488_6774872_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs194.snc4/38021_735073839143_17218442_41026489_1868584_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs094.ash2/38021_735073844133_17218442_41026490_3929010_n.jpg
Bigstunter10r
07-27-2010, 02:13 PM
Nice Pics!
KyleJ
07-27-2010, 03:18 PM
Taken by yours truly. Love the truck trick.
Trick
07-28-2010, 10:12 AM
so took my i/c pump up to omaha last night... and the guy said its working perfect up there. WTF???
Trick
07-29-2010, 05:25 AM
got my intercooler pump going tonight. Went to Omaha and finally looked up another Lightning owner. Found out 2 hoses were routed wrong.
ALSO, some jackass who put this truck together didn't get one of the caliper bracket bolts tight and it fell out and under braking would hit the rim.:cry:
Through a combination of zip ties and spare bolts I got back home.
Front bumper is now on, pics tomorrow.
daytonadad
07-31-2010, 09:01 AM
oooo pat see why i said dont take it on a long trip until you get all the little things fixed
now you know when you put stuff together to tighten bolts as you go. i must have just assumed the brackets were tight
Trick
08-09-2010, 05:55 AM
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs089.ash2/37769_738609738173_17212816_41161927_4933164_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs226.snc4/38658_150356591642125_143070612370723_466692_46809 22_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs206.snc4/38658_150356611642123_143070612370723_466698_60927 66_n.jpg
jazzman
08-09-2010, 12:52 PM
Saw this truck in person Sat and it looked minty.
Trick
09-01-2010, 03:41 AM
ran something over on I470 while heading to the street races in KCMO...
http://i38.photobucket.com/albums/e104/mustangsally93/lightning/DSC_0064.jpg
http://i38.photobucket.com/albums/e104/mustangsally93/lightning/DSC_0089.jpg
Trick
09-01-2010, 03:43 AM
borrowed a couple spares..
http://i38.photobucket.com/albums/e104/mustangsally93/lightning/DSC_0121.jpg
did a big burnout on them.
http://www.youtube.com/watch?v=8LKCo_KAZIo
Trick
09-01-2010, 03:44 AM
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs181.ash2/44409_744068648473_17212816_41360903_2912993_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs181.ash2/44409_744068653463_17212816_41360904_823290_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs214.ash2/47757_744068718333_17212816_41360905_2852529_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs434.snc4/47757_744068728313_17212816_41360907_3803535_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs214.ash2/47757_744068733303_17212816_41360908_7680331_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs434.snc4/47757_744068738293_17212816_41360909_445782_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs434.snc4/47757_744068743283_17212816_41360910_1492140_n.jpg
Trick
10-01-2010, 06:03 PM
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs343.ash2/62368_753685027173_17212816_41600645_1671664_n.jpg
and some new tires courtesy of Don's Used Tires.
Trick
10-20-2010, 04:18 AM
Old rear out
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs464.ash2/73745_758945320503_17212816_41726460_6082416_n.jpg
New rear lookin fresh.
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs749.snc4/64946_759171851533_17212816_41730782_2551530_n.jpg
Rear end in, Driveshaft loop on. Just need my traction bars on...
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs918.snc4/73158_759331496603_17212816_41734908_6192771_n.jpg
Trick
10-28-2010, 02:50 AM
Shitty pic overexposed with my phone.
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs454.ash2/72793_759909732813_17212816_41744843_8308987_n.jpg
Welp, broke off a traction bar on my way to KCIR this past weekend. Could have been REALLY bad as the front mount broke and was dragging the bar front side down on hwy 2 going 80mph.
Headed back to Lincoln and without the traction bars on there, I noticed a vibration in the truck. Started watching the wheels and it was wobbling back and forth.
Here's whats going on: The rear drivers side wheel will literally blow up with brake dust shortly after cleaning it. So maybe it is stuck and following a warped rotor?? That or I have bad bearings or a bent axle shaft? This rear was supposedly rebuilt before selling it and the person I bought it from told me he'd fix anything that was defective... So I'm not sure where to start.
Trick
11-05-2010, 05:29 PM
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs244.snc4/39550_765371682023_17212816_41878931_5563094_n.jpg
Trick
11-20-2010, 06:29 PM
http://www.youtube.com/watch?v=zfoaInMnE4c
daytonadad
11-20-2010, 07:33 PM
looks like you had some good runs, now to get it into the 11s
Trick
02-15-2011, 10:59 AM
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash1/168384_796783098293_17212816_42534470_8079600_n.jp g
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/182691_796782963563_17212816_42534469_8341334_n.jp g
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash1/168306_796783123243_17212816_42534471_3216344_n.jp g
vBulletin® v3.8.0, Copyright ©2000-2012, Jelsoft Enterprises Ltd.